Step-by-Step Guide for Using the Simpled Door Sensor (DA-SP)

The Simpled DA-SP Door Sensor is a compact and user-friendly device designed to enhance your home security system. Follow these instructions to install, pair, and manage your door sensor effectively.

Installation

2. Installation

Materials Needed:

• Simpled Door Sensor
• Adhesive tape (included in the package)
• Smartphone with the TTLOCK app installed

Steps:

1. Prepare the Door Sensor:

   • Remove the shell of the door sensor.
   
    
   • Insert the CR2032 battery if not already installed.
   
   

2. Choose the Door Opening Direction:

   • Decide whether your door opens to the left or right.
   
   

3. Clean the Installation Surface:

   • Wipe the door surface and frame to ensure a strong adhesive bond.

4. Attach the Sensor:

   • Peel off the adhesive backing.
   
    
   • Align the sensor parts and stick them securely on the door and the door frame. Ensure the gap between the two parts does not exceed 22mm.
   
   

5. Reinstall the Shell:

   • Once the sensor is installed, snap the shell back into place.

3. Pairing the Sensor with the App

1. Activate the Simpled App:

   • Open the app on your smartphone and select the lock you want to pair the sensor with.
   
   

2. Initiate Pairing:

   • Tap on Settings, then Door Sensor.
   
    
   • Press the "+" button and follow the prompts.
   

3. Reset if Necessary:

   • If the sensor fails to pair, press the reset button on the device for 10 seconds. The light will turn on for 1 second, indicating a successful reset.
   • Retry the pairing process.