SF-SP and SF-SPS Slim series manual

You can find the manual and dat specs of the SF-SP and SF-SPS Slim series below:

What's included?:

1x Spindle 70 mm

 

 

1x Spindle 60 mm  

 

 

1x Split pin

 

 

2x Screw Stubs: 30x8

 

 

2x Sliding Screws

 

 

4x Mortice Screws, 10x5 mm

(for Aluminum Door)

 

 

4x Mortice Screws, 25x4 mm
(for Wooden Door)

 

 

1x M5x25 mm Screw

1x M5x30 mm Screw

1x M5x40 mm Screw

1x M5x50 mm Screw

1x M5x60 mm Screw

1x M5x70 mm Screw

 

 

1x Phone Tag (Sticker)

2x Proxy Fobs

2x Emergency Key

4x Alkaline Battery 1.5v

2x Rubber Gasket

Specifications:

 

Doors Applicable	Aluminum Door Wooden Door
Working voltage	6V/4 x AA Batteries
Door Thickness	35-70 mm (For more, you need Longer spindle and Screws)
Data capacity	Fingerprint: 200 Passcode: 150 Fob/Stickers: 200 Unlimited eKeys Remote Control: 1
Working temperature	-10°C-55°C
Weatherproof outside panel	Yes

Factory reset:

 

1. Open the battery cover

2. Long-press the reset button for 5 seconds

3. Key in "000#"

4. Two short beeps show that the reset process is successful

 

Notice:

The previous passcodes, RFID cards or fingerprints will no longer work after reset. The initial password would be 123456#

 

Remove the old handle:

 

Notice 1: Do not close the door until installation is complete.

Notice 2: You can keep the old mortise if it’s compatible with the Simpled Smart Lock.
Most Multipoint locks are compatible!

Change the direction of the handle:

Notice: Please make sure the arrow on the spindle receptor is pointing towards the handle

 

 

Compatibility Test:

One test to see if the new lock is compatible with your existing
multipoint locks is to check if it can fully retract the hooks and bolts on
your multipoint mechanism.

Step 1:
Mark the current position of all
bolts/hooks on your existing
multipoint lock.

 

 

 

 

 

Step 2:
From the inside:
1. Locate the internal lock body on the spindle.
2. Align the lock with the door and hold it firmly.
3. Lift the handle fully to throw the bolts.
4. Done, remove it for now.

 

 

 

Step 3:  
Take the front body(fingerprint handle)
and turn the spindle receptor so that the
arrow POINTS AWAY from the handle.
— "It's the opposite of what is suggested
on the lock! We do this only for the test
part!"

 

 

Step 4:
From the outside:
1. Locate the front body on the spindle.
2. Align the lock with the door and hold it
firmly.
3. Push the handle fully downward to
retract the bolts.

 

 

Notice: Please make sure the arrow on the spindle receptor is pointing towards the handle

 

 

Installation:

Step 1: Installing the mortice: (Sold separately - Not necessarily needed)

If your existing multipoint lock is compatible with the Simpled Smart lock,
skip this step. Otherwise, check if the latch direction is correct for your door.
If you need to change the latch direction, follow the steps below.

Step 1: Push upward and press it tightly

Step 2: Push the Latch Bolt into the Mortice

Step 3: Rotate the Latch Bolt 180°

 

Step 2: Spindle  

1. After fitting the spindle, insert the split 
pin and bend the ends with a plier.
2. Choose the correct length of stubs according
to your door thickness.
3. Fix the bottom stub.

 

 

 

Step 3: Fixing the sliding stub

Fit the flat Head 
Screw to the stub
and fix it into position
to line up with the
Door holes.

 

 

 

Step 4: Installing the front panel

Adjust the top stub to fit through the upper
hole and thread the cable.
An extra drilling might be needed if there’s no room to
pass the cable.*
Make sure the split pin does not touch the door frame.
Tip: Use masking tape to hold the handle in place.

 

 

When you want to drill a new hole for the cable, you might need to remove the multi-point mechanism to locate a safe spot to drill. To remove the multi-point lock, you need to unscrew several screws down its length.

Step 5: Installing the back panel

1. Fit the rubber gasket to the inner panel.
(Use some masking tape to hold in place)
2. Use a screwdriver to remove the battery cover from the back handle.
(You may need to use the clear suction cup to grip the battery cover.)
3. Connect the cable and then carefully push any excess cable
back into the hole cavity.
You can use a Cable Extender inside the handle box if the cable is too short.
4. Align the lock body over the spindle.

5. Tighten the back panel screws.

 

Tips: 

Lift the handle to engage the deadbolts/hooks and then pull
the handle down to disengage.
The internal handle should always open the door.

TEST: Try pulling the outer handle down. It should move but do nothing.
Then insert the keys and turn. Try lifting the handle and then pull down.
This time the latch/hooks should retract.

Note: Simpled Smart Lock comes with an auto-lock feature. It means the
spindle doesn't engage from the outside when pushing the handle
downward unless you gain access with a fingerprint, passcode, etc.

In multi-point locks, the bolts/deadbolts/hooks will engage when you
lift the handles. Otherwise, the door may only be held on one latch.
So it's always recommended to lift the handles to engage the multi-points.

Don't use chemicals for cleaning as it may affect the guarantee. A soft,
damp cloth is best for gently cleaning without scratching the surface.

 

 

Setting up the Smart App (TTLOCK):

1. Download the “TTlock App” from the App Store or Google Play by either
- Scanning the QR code
- Searching the “TTLock” app
2. Sign up for a TTlock account, and add the smart lock to the device list

 

3. Activate the lock’s Bluetooth by touching the Lock’s keypad
4. Tap on “+ Add Lock” and select your lock type. Press on “All Locks”
if you are not sure.
5. In the “Nearby Locks” list, select the appeared lock. Please make sure
you are near the lock in the Bluetooth range.
6. Rename the Lock “Sweet Home, Spain Villa, London Office, …”

Bluetooth Unlock:

Try to open the lock by tapping on the “Lock Icon”. Please ensure there is
no problem with Bluetooth communication, and the phone is within the
5-meter range of the Simpled Slim Smart Lock.

 

Add Fingerprints:

For adding a new fingerprint,
1. Select Fingerprint from the lock screen in the app
2. Tap on the three dots
3. Select Add Fingerprint
4. Choose a name for later reference “ It helps you to recognise the
fingerprint in the unlocking reports”.
5. Choose whether you want to create limited-time or permanent access.
6. Then start and press your fingerprint 4 times on the fingerprint sensor
7. You should see it is done successfully.
8. Test the fingerprint.

 

Add Passcodes:

You can create different passcodes types to open the Simpled slim lock:
permanent, time-limited, OTP(one-time passcode), cycle or custom.
You can easily share the passcode with other users via SMS, Email,
WhatsApp.
You can create, limit, share and delete a passcode without a bridge using
the app when you are near the lock.
But for example, If you want to eliminate a passcode remotely, you need
a Bridge. You can learn more about Bridge features in its section.
Gain access with Passcodes:
1. Touch the keypad with your palm or back of your fingers to wake up
the lock.
2. Enter the generated passcode. (Before setting new passcodes, the
default code is 123456#)
3. Press #.

 

Passcode Management:

Click on “Passcodes”. In this section, the Admin user can
1. Change, delete or reset passcodes.
2. Review the unlock records of passcodes.

 

Create and Send e-Keys:

By selecting the “Send eKey” as shown in the figure, you can create and
share an electronic key with your friends, family, maid, dog walker or your
AirBnB guests. For using the eKey, they need to download and sign up
for a new account. This will also help you nd out about the time they
opened the lock. E-Keys are also available in different types: Permanent,
Time-Limited, One-time and recurring.
You can authorise a user as Admin in the Authorised Admin section.

e-Key Management:

Click on eKeys. In this section, the Admin user can
1. reset or delete eKeys.
2. review the access records.

 

 

 

 

 

 

 

 

Create Admin:

With this feature, you can assign a
new timed/ permanent admin to
have the same level of access to
the lock.
For example, your receptionist or
even your guest will be able to add
new users and even register their
own fingerprint on the smart lock,
up to the time their users are valid.

 

 

 

Program Card, Proximity Fobs, Phone Tag Stickers:

Before a proxy fob or sticker can open the lock, it is required to be
programmed first. Fobs/Stickers can also be Permanent or Limited by time.

Unlocking Records:

Tap on “records”. In this part, you can review all the unlock records.

Activate Passage Mode:

1. Choose the lock
2. Tap on “Settings”
3. Select “Passage Mode”
4. Turn on this mode and
press Save
Note: To activate the passage mode, you need to unlock it
once with the app!
When passage mode is activated, you can long-press # to force-lock the Simpled lock! It’s the same when the auto-lock feature is off; you can long-press # to lock the door.

Import data from an old Simpled lock:

To transfer data from an old Simpled lock to a new one you can follow these steps:
1. Choose the new lock on the app.
2. Tap on "Settings"
3. Select "Import from another lock"
4. Choose your old lock from the list.

 

 

Turning off/on the lock sound:

1. Open the app.
2. Tap on the lock.
3. Choose “Settings”.
4. Disable/Enable the Lock sound.

 

 

 

Transfer lock to a new owner:

1. Open the app
2. Tap on the more option icon on the top Left
3. Select “Settings”
4. Tap on “Transfer Lock(s)”
5. Select the lock(s) and press Next
6. Enter the new owner Account, and press Next.
Notice: The selected lock(s) will be permanently transferred.

 

WiFi Bridge Pairing:

and WiFi. With the Gateway, you can
• open your lock from anywhere
• remotely read the lock operation records, including, fingerprint, passcodes
• calibrate the lock clock remotely
• remotely delete and modify passcodes
• use the Simpled lock with your Alexa
• use the Simpled lock with your Google home

Light Status:

Pair the Gateway with APP:

 

 

Note: You can register an account by your email address or mobile number that is available in 200 countries around the world.